Diesel generator "Könner & Söhnen" KS 14-1DE ATSR

Voltage230
Max power11.0 kW
Nominal power10.5 kW
Engine startElectric
Outlets1 x CEE 230 V 32 A, 2 x Schuko 230 V, 1 x CEE 230 V 63 A
Special functionsATS output, Preheater function, V-twin two-cylinder, Air cooled engine

4399 *

HIGH-PERFORMANCE TWO-CYLINDER ENGINE

High-performance and robust L-twin air-cooled two-cylinder four stroke engine (21 hp). The engine design is more balanced thanks two cylinders in line, which ensures reduced vibration of the generator during operation.

MULTIFUNCTION LED DISPLAY

Modern multifunction LED display shows frequency, voltage and operating hours of the generator. Displayed information makes it easy to determine the voltage generated by the device.

ATS output

KS ATS 4/63HD
339 €
Battery voltage12 V DC
Voltage230/400
Current (max)63 A
Working environmentfrom -10°C to +55°C; humidity: ⩽60%
Storage environmentfrom -10°C to +70°C; humidity: ⩽60%
IP protection classIP41
Insulation classAC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply, A2
Control cable length4.4 m
Net dimensions (LxWxH)320х190х400 mm
Gross dimensions (LxWxH)420х220х520 mm
Net weight8.4 kg
Gross weight8.8 kg
EAN code4260405362455

The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.

Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.

PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

The KS ATS 4/63HD ATS unit is compatible with all Könner & Söhnen diesel generators with the abbreviation “ATSR” in the article number.

The generator is suitable for connecting the ATS (Automatic Transfer Switch) system. The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.

Preheater function

All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.

STEEL TANK

"Könner & Söhnen" generators are equipped with an enlarged steel fuel tank, which extends the generator's operating time without refueling. The fuel level indicator is located on the tank for ease of use.
Voltage
230
Max power, kW
11.0
Nominal power, kW
10.5
Frequency, Hz
50
Current (max), А
47.83
Outlets
1 x CEE 230 V 32 A, 2 x Schuko 230 V, 1 x CEE 230 V 63 A
Avg. working time (power 50%), h***
11.5
Control panel
LED-display (voltage, frequency, working hours)
Noise level Lpa (7m)/Lwa, dB
74/99
Power output DC, V/А
12/8.3
Engine type
Diesel powered L-twin air-cooled two-cylinder, four-stroke
Engine model
KS 1020HD
Engine power, hp/kW
21/15.45
Preheater
+
Fuel tank volume, l
30
Crank case volume, l
2.8
Engine cylinder volume, cm3
997
Power output controller
Intelligent voltage stabilization system AVR
Engine start
Electric
Frame diameter
32
Accumulator, A·h
45
Output for ATS
+
Net dimensions (LxWxH), mm
1050x640x700
Gross dimensions (LxWxH), mm
1100x680x820
Net weight, kg
220
Gross weight, kg
240
Protection class
IP23M
EAN code
4260405363193

Assembled in PRC.

***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.