Diesel generator "Könner & Söhnen" KS 14-2DE ATSR
Voltage | 230 |
Max power | 11.0 kW |
Nominal power | 10.5 kW |
Engine start | Electric |
Outlets | 1 x CEE 230 V 32 A, 2 x Schuko 230 V, 1 x CEE 230 V 63 A |
Special functions | ATS output, Preheater function, V-twin two-cylinder, Soundproof antivandal housing, Air cooled engine |
5299 * €
HIGH-PERFORMANCE TWO-CYLINDER ENGINE
SOUNDPROOF ANTIVANDAL HOUSING
ERGONOMIC CONTROL PANEL
SMARTGEN MULTIFUNCTION DIGITAL CONTROLLER
- Digital display shows operating voltage of generator
- Power display
- Multifunction display shows the current, frequency, battery voltage, total operating hours (maximum 999 hours), engine and generator temperature. The controller also protects the engine from over- and undervoltage, under- and overfrequency, overload and overtemperature shown on the multifunction display.
- Function switching buttons - the parameters displayed can be adjusted by pressing the touch buttons (UP, DOWN, LEFT, RIGHT)
- The indicator shows low oil pressure, when it appears - the engine will be turned off immediately
CONTACT STRIPE
Preheater function
ATS output
Battery voltage | 12 V DC |
Voltage | 230/400 |
Current (max) | 63 A |
Working environment | from -10°C to +55°C; humidity: ⩽60% |
Storage environment | from -10°C to +70°C; humidity: ⩽60% |
IP protection class | IP41 |
Insulation class | AC1.5KV / 1min 1mA |
Maximum battery charging current from the built-in power supply, A | 2 |
Control cable length | 4.4 m |
Net dimensions (LxWxH) | 320х190х400 mm |
Gross dimensions (LxWxH) | 420х220х520 mm |
Net weight | 8.4 kg |
Gross weight | 8.8 kg |
EAN code | 4260405362455 |
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.
PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off
The KS ATS 4/63HD ATS unit is compatible with all Könner & Söhnen diesel generators with the abbreviation “ATSR” in the article number.
The generator is suitable for connecting the ATS (Automatic Transfer Switch) system. The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.
Assembled in PRC.
***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
Related products