Diesel generator "Könner & Söhnen" KS 6100HDE (EURO V)

Voltage230
Max power5.5 kW
Nominal power5.0 kW
Engine startManual/electric
Outlets1 x Schuko 230 V, 1 x CEE 230 V 32 A
Special functionsPreheater function, 1-cylinder, Air cooled engine

1659*

Könner & Söhnen engines

Engines for both diesel and gasoline generators are manufactured under the license of DIMAX Int. GmbH and are marked with K&S logo. High power of engines in relation to the alternator allows to receive the declared power output and maintain stable work at any load. All engines are tested for continuous operation, and then disassembled and examined for trouble-shooting purposes. Each engine and each generator have an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards, including the latest EURO V emission standards.

Increased engine resource

Könner & Söhnen® diesel generators of the "HEAVY DUTY" series have an increased motor resource - so they have a longer service life, can work for more hours without a break. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty.  To show high performance, machines should be maintained properly.

Ergonomic control panel

Convenient and ergonomic generator's control panel allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintain the generator, extending the operation life.

Enforced frame

Additional frame reinforcement with the upper protective strips allows HEAVY DUTY professional series generators to operate in a more rigid mode. The reinforced frame structure protects the tank against damage during operation and transportation.

Preheater function

All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.

AVR

“Könner & Söhnen” series diesel generators are equipped with intelligent voltage stabilization system AVR. It allows to keep the voltage at a constant value of 230 V and protects against unwanted short circuits.

Dampers to lower vibration

All models of Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. The working generator will not damage the floor covering, and the frame coating will not be scratched.

Accessories set

Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.
Voltage
230
Max power, kW
5.5
Nominal power, kW
5.0
Frequency, Hz
50
Current (max), А
23.91
Outlets
1 x Schuko 230 V, 1 x CEE 230 V 32 A
Avg. working time (power 50%), h***
8.5
LED display
Voltage, frequency, working hours
Noise level Lpa (7m)/Lwa, dB
71/96
Power output DC, V/А
12/8.3
Engine type
Diesel powered one-cylinder, four-stroke air-cooled
Engine model
KS 440HD-V
Engine power, hp/kW
12.0/8.83
Preheater
+
Fuel tank volume, l
11
Crank case volume, l
1.65
Engine cylinder volume, cm3
418
Power output controller
Intelligent voltage stabilization system AVR
Engine start
Manual/electric
Frame diameter
32
Accumulator, A·h
30
Output for ATS
-
Net dimensions (LxWxH), mm
730×495×630
Gross dimensions (LxWxH), mm
775×500×655
Net weight, kg
107
Gross weight, kg
115
Protection class
IP23M
EAN code
4260405362592

Assembled in PRC.

***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.

Accessories