Diesel generator "Könner & Söhnen" KS 8200HDES-1/3 ATSR

Voltage230/400
Max power (230V)5.5 kW
Nominal power (230V)5.0 kW
Max power (400V)6.5 kW
Nominal power (400V)6.0 kW
Engine startElectric
Outlets1 x CEE 230 V 32 A, 1 x CEE 400 V 16 A
Special functionsVTS 230/400 V, ATS output, Preheater function, 1-cylinder, Soundproof antivandal housing, Air cooled engine

Branded engines

Engines for diesel generators, as well as for gasoline, are manufactured under license DIMAX Int. GmbH and are marked with their own brand with the logo. In all models, the power reserve of the engine in relation to the alternator allows you to issue the declared voltage and maintain its stability in the full range of voltages. All engines are tested for long continuous operation, and then disassembled and examined for faults. Each engine and each generator has an individual serial number, which allows us to control the quality of production and service. The engines comply with all international and European standards of quality, efficiency, environmental friendliness (including the level of harmful emissions and noise).

VTS system

Universal generators 2 in 1 with a unique phase switching system VTS (Voltage Transfer Switch), which allows you to use one generator as a single-phase (230V) and three-phase (400V) with almost no loss of power. Each mode has its own automatic protection. No need to buy two separate generators.

Automatic transfer switch

KS ATS 4/63HD
339 €
Battery voltage12 V DC
Voltage230/400
Current (max)63 A
Working environmentfrom -10°C to +55°C; humidity: ⩽60%
Storage environmentfrom -10°C to +70°C; humidity: ⩽60%
IP protection classIP41
Insulation classAC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply, A2
Control cable length4.4 m
Net dimensions (LxWxH)320х190х400 mm
Gross dimensions (LxWxH)420х220х520 mm
Net weight8.4 kg
Gross weight8.8 kg
EAN code4260405362455

The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.

Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.

PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

The KS ATS 4/63HD ATS unit is compatible with all Könner & Söhnen diesel generators with the abbreviation “ATSR” in the article number.

The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.

Pre-start heating (PREHEATER)

Diesel generators series "HEAVY DUTY" are equipped with a pre-start heating function, which allows you to run the generator in the winter without much effort.

Housing

All-season, noise-absorbing, vandal-proof casing provides effective protection of the generator and prolongs its service life. The casing is equipped with handles and transport wheels for easy movement.

Transport wheels

The generator housing is equipped with a 4-wheel transport set for easy movement of the unit.

Accessories set

Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.
Voltage
230/400
Max/Nominal power (230V), kW
5.5/5.0
Max/Nominal power (400V), kW
6.5/6.0
Frequency, Hz
50
Current (max.) 230/400 V, A
23.91/11.74
Outlets
1 x CEE 230 V 32 A, 1 x CEE 400 V 16 A
Avg. working time (power 50%), h***
12.5
LED display
Voltage, frequency, working hours
Noise level Lpa (7m)/Lwa, dB
69/94
Power output DC, V/А
12/8.3
Engine type
Diesel powered one-cylinder, four-stroke air-cooled
Engine model
KS 480HD-V
Engine power, hp/kW
14.0/10.3
Preheater
+
Fuel tank volume, l
20
Crank case volume, l
1.65
Engine cylinder volume, cm3
456
Power output controller
Intelligent voltage stabilization system AVR
Engine start
Electric
Accumulator, A·h
30
Output for ATS
+
Net dimensions (LxWxH), mm
900x545x905
Gross dimensions (LxWxH), mm
960x570x985
Net weight, kg
163
Gross weight, kg
173
Protection class
IP23M
EAN code
4260405362370

Assembled in PRC.

***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.

Accessories