Gasoline generator "Könner & Söhnen" KS 10000E-3

Voltage	400
Max power	8.0 kW
Nominal power	7.5 kW
Engine start	Manual/electric
Outlets	1 x Schuko 230 V, 1 x CEE 400 V 16 A
Special functions	Gasoline

~~1429 €~~ 1199 €

Only use the three-phase generator for three-phase consumers (400 V)!

KÖNNER & SÖHNEN ENGINES

Specially for the Könner & Söhnen trademark German engineers have created K&S series engines, that have passed multi-hour and multi-level tests, that’s why they are so reliable. High-performance K&S engines comply with the latest EURO V emission standards.

Individual Serial Numbers on engines

Könner & Söhnen engines meet all world and European standards of quality, including the harmful emissions level and noise level. This is proved by European certificates of quality. Each engine and each generator have their own individual serial number, which allows us to control the quality of production and service. Könner & Söhnen motors have easy start and low vibration.

CONVENIENT ERGONOMIC CONTROL PANEL with electic start

Сonvenient and ergonomic panel of generator allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintenance the generator, extending the life of the operation.

230V OR 400V

The presented series includes models for single- and three-phase consumers. The generator control panel with the ATS function has corresponding 230V and 400V mains terminals.

ALTERNATOR WITH 100% COPPER WINDING

TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.

EASY START SYSTEM

Easy start system system allows you to start the engine quickly and to do this without much effort. For ease of use, generators of this type have two types of startup - manual and electric. More powerful models are additionally equipped with an electric start system.

STEEL TANK

“Könner & Söhnen” generators are equipped with an enlarged steel fuel tank, which extends the generator’s operating time without refueling. The fuel level indicator is located on the tank for ease of use.

DAMPERS TO LOWER VIBRATION

All models of the Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working generator will not damage the floor covering, and the frame coating will not be scratched.

Voltage

400

Max power, kW

8.0

Nominal power, kW

7.5

Frequency, Hz

50**

Current (max), А

14.45

Outlets

1 x Schuko 230 V, 1 x CEE 400 V 16 A

Fuel tank volume, l

Avg. working time (power 50%), h***

LED display

Voltage, frequency, working hours

Noise level Lpa (7m)/Lwa, dB

71/96

Power output DC, V/А

12/8.3

Engine model

KS 440

Engine type

Gasoline powered one-cylinder, four-stroke air-cooled

Engine power, hp/kW

18.0/13.24

Crank case volume, l

1.2

Engine cylinder volume, cm3

440

Power output controller

Intelligent voltage stabilization system AVR

Engine start

Manual/electric

Alternator winding

Copper

Net dimensions (LxWxH), mm

680x545x550

Gross dimensions (LxWxH), mm

700x545x590

Net weight, kg

88.0

Gross weight, kg

90.4

Protection class

IP23M

EAN code

4260405361182

Assembled in PRC.

**In transient modes, the frequency of the generator can change in the short term, that is, during normal operation of the generator, the deviation of the frequency indicator is permissible. Depending on the type of generator, engine and operating mode, the frequency can be 49-54Hz

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.