The high-performance KS 15-1E 1/3 ATSR gasoline generator is based on a robust proprietary 22 HP two-cylinder engine from “Könner & Söhnen” that meets all European quality standards, including the latest EURO 5 emission standards. This generator is suitable for connecting an ATS unit and has a unique VTS phase switching system, which allows using the generator both in single-phase mode (230 V) and three-phase mode (400 V) with almost no loss of power! A user-friendly ergonomic control panel with an engine emergency stop button and a multifunction LED display allows monitoring of the generator operation: voltage, frequency, operating hours, as well as oil level. This model is equipped with sockets for full power removal by the generator. The sockets are equipped with fuses and completed with suitable plugs. The high-capacity 55 l fuel tank ensures lengthy and continuous operation.
Gasoline generator "Könner & Söhnen" KS 15-1E 1/3 ATSR
Voltage | 230/400 V |
Max power (230V) | 11.5 kW |
Nominal power (230V) | 11.0 kW |
Max power (400V) | 15.6 kVA |
Nominal power (400V) | 15.0 kVA |
Engine start | Electric |
Outlets | 1 x CEE 230 V 32 A, 1 x CEE 230 V 63 A |
Special functions | VTS 230/400 V, Gasoline, ATS output |
4099
€
3999
€
HIGH-PERFORMANCE ENGINE
VTS SYSTEM
The unique innovative VTS (Voltage Transfer Switch) phase switching system with equal power for single-phase (230V) and three-phase (400V) with almost no loss of power. Each mode has its own circuit breaker.
ERGONOMIC CONTROL PANEL
ATS OUTPUT
Power (230V) | 14 kW |
Current (max) 230 V | 64 A |
Power 400V | 21 kW |
Current (max) 400 V | 32 A |
Working environment | from -10°C to +55°C; humidity: ⩽60% |
Storage environment | from -10°C to +70°C; humidity: ⩽60% |
Voltage | 230/400 V |
Frequency | 50 Hz |
IP protection class | IP41 |
Net dimensions (LxWxH) | 220х150х370 mm |
Gross dimensions (LxWxH) | 325х200x405 mm |
Net weight | 5.5 kg |
Gross weight | 6.1 kg |
EAN code | 4260405363667 |
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasoline and diesel generators with an electric starter are equipped with a universal 5-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.
PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT: - Automatic/manual operation - Programming of engine starting time after power outage - Programming of engine warm-up time before connecting to consumer - Setting of starter operation time - Engine performance monitoring - Battery charging when the generator is off
The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.
ALTERNATOR WITH 100% COPPER WINDING
Assembled in PRC.
**In transient modes, the frequency of the generator can change in the short term, that is, during normal operation of the generator, the deviation of the frequency indicator is permissible. Depending on the type of generator, engine and operating mode, the frequency can be 49-54Hz
Related products