Gasoline generator "Könner & Söhnen" KS 7000E 1/3

Voltage230/400
Max power (230V)5.5 kW
Nominal power (230V)5.0 kW
Max power (400V)5.5 kW
Nominal power (400V)5.0 kW
Engine startManual/electric
Outlets1 x CEE 230 V 32 A, 1 x CEE 400 V 16 A
Special functionsVTS 230/400 V, Gasoline

1299 *

The unique innovative VTS (Voltage transfer switch) phase switching system allows using the generator both in three-phase mode (400V) and in single-phase mode (230V) without loss of power! It is no longer necessary to purchase two separate generators and maintain them: just switch the mode and use the TM Könner & Söhnen generator with the phase switching system at the required voltage.

VTS SYSTEM

The unique innovative VTS (Voltage Transfer Switch) phase switching system with equal power for single-phase (230V) and three-phase (400V) consumers. Each mode has its own circuit breaker.

KÖNNER & SÖHNEN ENGINES

Specially for the Könner & Söhnen trademark German engineers have created K&S series engines, that have passed multi-hour and multi-level tests, that’s why they are so reliable.

Individual Serial Numbers on engines

Könner & Söhnen engines meet all world and European standards of quality, including the latest EURO V emission standards. This is proved by European certificates of quality. Each engine and each generator have their own individual serial number, which allows us to control the quality of production and service.

CONVENIENT ERGONOMIC CONTROL PANEL

Сonvenient and ergonomic panel of generator allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintenance the generator, extending the life of the operation.

EQUIPMENT

The generator panel is equipped with ergonomic connectors for connecting single- and threephase consumers. High-output sockets are made of high-quality heat-resistant plastic.

SYNCHRONOUS ALTERNATOR

The synchronous alternator with integrated intelligent AVR system is specially designed for singleand three-phase operation without loss of power. High workmanship and copper winding can withstand prolonged ultimate loads.

EASY START SYSTEM

Easy start system system allows you to start the engine quickly and to do this without much effort. For ease of use, generators of this type have two types of startup - manual and electric. More powerful models are additionally equipped with an electric start system.

ALTERNATOR WITH 100% COPPER WINDING

TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.

STEEL TANK

“Könner & Söhnen” generators are equipped with an enlarged steel fuel tank, which extends the generator’s operating time without refueling. The fuel level indicator is located on the tank for ease of use.

DAMPERS TO LOWER VIBRATION

All models of the Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working generator will not damage the floor covering, and the frame coating will not be scratched.

* Only in case that the welding inverter has 85% efficiency and an arc voltage of 25 V.

Voltage
230/400
Max/Nominal power (230V), kW
5.5/5.0
Max/Nominal power (400V), kW
5.5/5.0
Frequency, Hz
50
Current (max.) 230/400 V, A
23.91/9.93
Outlets
1 x CEE 230 V 32 A, 1 x CEE 400 V 16 A
Fuel tank volume, l
25
Avg. working time (power 50%), h***
17
LED display
Voltage in Volt, Frequency, Working hours
Noise level Lpa (7m)/Lwa, dB
70/95
Power output DC, V/А
12/8.3
Engine model
KS 390
Engine type
Gasoline powered one-cylinder, four-stroke air-cooled
Engine power, hp/kW
13.0/9.56
Crank case volume, l
1.1
Engine cylinder volume, cm3
389
Power output controller
Intelligent voltage stabilization system AVR
Engine start
Manual/electric
Net dimensions (LxWxH), mm
680×545×550
Gross dimensions (LxWxH), mm
700×545×590
Net weight, kg
81
Gross weight, kg
83
Protection class
IP23M
EAN code
4260405362264

Assembled in PRC.

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.