Gasoline generator "Könner & Söhnen" KS 10000E

Voltage	230 V
Max power	8.0 kW
Nominal power	7.5 kW
Engine start	Manual/electric
Outlets	1 x Schuko 230 V, 1 x CEE 230 V 32 A
Special functions	Gasoline

KÖNNER & SÖHNEN ENGINES

Specially for the Könner & Söhnen trademark German engineers have created K&S series engines, that have passed multi-hour and multi-level tests, that’s why they are so reliable.

Individual Serial Numbers on engines

Könner & Söhnen engines meet all world and European standards of quality, including the latest EURO V emission standards. This is proved by European certificates of quality. Each engine and each generator have their own individual serial number, which allows us to control the quality of production and service.

CONVENIENT ERGONOMIC CONTROL PANEL with electric start

Generator’s ergonomic control panel allows you to easily control its operation due to the convenient functions location: a modern LED display (counter hours, frequency, voltage), electric start, emergency (circuit breaker) switch, low oil level sensor, outlets, terminals and more.

ALTERNATOR WITH 100% COPPER WINDING

TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.

EASY START SYSTEM

Easy start system system allows you to start the engine quickly and to do this without much effort. For ease of use, generators of this type have two types of startup - manual and electric. More powerful models are additionally equipped with an electric start system.

STEEL TANK

“Könner & Söhnen” generators are equipped with an enlarged steel fuel tank, which extends the generator’s operating time without refueling. The fuel level indicator is located on the tank for ease of use.

DAMPERS TO LOWER VIBRATION

All models of the Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working generator will not damage the floor covering, and the frame coating will not be scratched.

optional

KS 10 KIT

Diameter	20.5 cm
Diameter of the frame	32 mm
Gross dimensions (LxWxH)	670x300x90 mm
Net weight	5.2 kg
Gross weight	5.9 kg
EAN code	4260405363759

Includes:
Wheels – 2 pcs.
Handles – 2 pcs.
Support legs – 2 pcs.
Mounting kit – 1 pc.

Suitable for all modifications of KS 9000, KS 10000 gasoline generators with 32mm diameter frame.

The semi-axle has one flange fixed on it for attaching the semi-axle to the generator frame, with the other flange loose. This allows mounting the semi-axle on frames of different widths.

The transport kit KS 10 KIT includes 2 wheels, 2 support legs, a mounting kit and 2 handles.

Voltage, V

230

Max power, kW

8.0

Nominal power, kW

7.5

Power factor, cosφ

Frequency, Hz

50**

Current (max), А

34.78

Outlets

1 x Schuko 230 V, 1 x CEE 230 V 32 A

Fuel tank volume, l

Avg. working time (power 50%), h***

LED display

Voltage, frequency, working hours

Noise level Lpa (7m)/Lwa, dB

71/96

Power output DC, V/А

12/8.3

Engine model

KS 440

Engine type

Gasoline powered one-cylinder, four-stroke air-cooled

Engine power, hp/kW

18.0/13.24

Crank case volume, l

1.2

Engine cylinder volume, cm3

440

Power output controller

Intelligent voltage stabilization system AVR

Engine start

Manual/electric

Alternator winding

Copper

Net dimensions (LxWxH), mm

680x545x550

Gross dimensions (LxWxH), mm

700x545x590

Net weight, kg

85.5

Gross weight, kg

87.9

Protection class

IP23M

EAN code

4260405361168

Assembled in PRC.

**In transient modes, the frequency of the generator can change in the short term, that is, during normal operation of the generator, the deviation of the frequency indicator is permissible. Depending on the type of generator, engine and operating mode, the frequency can be 49-54Hz
*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.