Inverter generator KS 6000iE S
| Voltage | 230 V |
| Max power | 5.5 kW |
| Nominal power | 5.0 kW |
| Engine start | Manual/electric |
| Outlets | 1 x Schuko 230 V, 1 x CEE 230 V 32 A |
| Special functions | Gasoline, Protective housing, Parallel connection, ATS output, Economy mode |
Pure sine wave
The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.
Robust engine
The reliable proprietary K&S engine is characterized by increased wear resistance, long-term and stable operation as well as meets all European quality standards, including the latest EURO V emission standards.
Economy mode
The ECONOMY MODE reduces fuel consumption up to 50% at low loads due to reduced engine speed.
AUTOMATIC TRANSFER SWITCH
| Peak power demand | in standby mode: 0.36 W, in operating mode: 1.2 W W |
| Power (230V) | 5.75 (11.5) kW |
| Current (max) 230 V | 25(50) A |
| Power 400V | 13 kW |
| Current (max) 400 V | 25 A |
| Working environment | from -10°C to +55°C; humidity: ⩽60% |
| Storage environment | from -10°C to +70°C; humidity: ⩽60% |
| Insulation class | AC1.0KV / 1min 1mA |
| Maximum battery charging current from the built-in power supply, A | 2 |
| Control cable length | 5 m |
| Voltage | 230/400 V |
| IP protection class | IP41 |
| Net dimensions (LxWxH) | 250 х 140 х 320 mm |
| Gross dimensions (LxWxH) | 325 х 200 х 405 mm |
| Net weight | 6.0 kg |
| Gross weight | 6.5 kg |
| EAN code | 4260405364787 |
The KS ATS 4/25 Gasoline ATS (Automatic Transfer Switch) unit from the German brand “Könner & Söhnen” automatically starts the generator and transfers load to it when the main power source is turned off and automatically stops the generator when the central power supply is restored. It is compatible with gasoline inverter generators that are equipped with a 8-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC for programming the engine starting time after power outage, the engine warm-up time before connecting power consumers as well as for signaling errors. It has a generator emergency stop button. The ATS unit can operate both in automatic and in manual mode.
PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
- Automatic/manual operation
- Programming of engine starting time after power outage
- Programming of engine warm-up time before connecting to consumer
- Setting of starter operation time
- Engine performance monitoring
- Battery charging when the generator is off
The KS ATS 4/25 Gasoline ATS unit is compatible with Könner & Söhnen gasoline inverter generators KS 4000iE S, KS 4100iE, KS 6000iE S, KS 8100iE ATSR with integrated 8-pin ATS connector.
The generator has an ATS output for connecting an ATS unit (Automatic Transfer Switch). The ATS unit automatically starts the generator and transfers the load to it when the main power supply is disconnected. The ATS output features an 8-pin connector for connecting the ATS unit KS ATS 4/25 Gasoline.
6-in-1 multifunction LED display
The 6-in-1 multifunction LED display has the following indicators: load indicator, fuel level indicator, hour meter, voltage, frequency, oil level indicator, overload indicator, working mode indicator.
Ergonomic control panel
Convenient location of all functions: working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, typical 12 V car socket for a wide range of car devices, gadgets and battery charging, 230 V sockets and grounding terminal.
Low noise level
Soundproof housing provides noise 70 dB (Lpa 7 m), comfortable use and convenient transportation and is equipped with transport system for easy handling.
High quality alternator
Könner & Söhnen inverter generators are equipped with a robust brushless alternator with 100% copper winding. The high-end compact permanent magnet alternator is housed in a plastic casing and can withstand maximum loads without any damage to ensure long-term and reliable operation of the generator set.
Parallel connection
| Cable (100% cooper) | AWG 2.08 mm2 |
| Maximum power | 7 kW |
| Cable length | 2х80 cm |
| Voltage | 230 V |
| Outlets | 1 x Schuko 230 V, 1 x CEE 230 V 32 A |
| Circuit breaker | + |
| Net weight | 1.36 kg |
| Gross weight | 1.60 kg |
| EAN code | 4260405362530 |
KS PU1 generator parallel unit from Könner & Söhnen allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained.
It is suitable for all Könner & Söhnen inverter generators which are parallel ready:
- KS 2000i S
- KS 2000iG S
- KS 4000iE S
- KS 4000iEG S
- KS 4100iEG
- KS 6000iE S
KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S
Transportation kit
Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.
Assembled in PRC.
Related products
