Automatic Transfer Switch KS ATS 4/32-12

Voltage230/400
Cable (100% cooper)4260405363650
Power (230V)14 kW
Current (max) 230 V64 A
Power 400V21 kW
Current (max) 400 V32 A

259*

The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.

Gasoline and diesel generators with an electric starter are equipped with a universal 5-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.

PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT: - Automatic/manual operation - Programming of engine starting time after power outage - Programming of engine warm-up time before connecting to consumer - Setting of starter operation time - Engine performance monitoring - Battery charging when the generator is off

Battery voltage
DC8.0-18V
Peak power demand, W
10
Voltage
230/400
Power (230V), kW
14
Current (max) 230 V, A
64
Power 400V, kW
21
Current (max) 400 V, A
32
Working environment
from -10°C to +55°C; humidity: ⩽60%
Storage environment
from -10°C to +70°C; humidity: ⩽60%
IP protection class
IP41
Insulation class
AC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply, A
Control cable length, m
3
Net dimensions (LxWxH), mm
220 х150х370
Gross dimensions (LxWxH), mm
220х150х370
Net weight, kg
5.5
Gross weight, kg
6.1
Frequency, Hz
50
Cable (100% cooper)
4260405363650

Assembled in PRC.