Automatic Transfer Switch KS ATS 4/63HD

Voltage230/400 V
Current (max)63 A

The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.

The KS ATS 4/63HD ATS unit is suitable for single-cylinder diesel generators from Könner & Söhnen with the ATSR abbreviation in the article, which are equipped with a universal 6-pin connector for connecting the automatic transfer switch (ATS input).

Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.

PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

Battery voltage
12 V DC
Current (max), A
63
Working environment
from -10°C to +55°C; humidity: ⩽60%
Storage environment
from -10°C to +70°C; humidity: ⩽60%
Insulation class
AC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply, A
2
Control cable length, m
4.4
Voltage, V
230/400
Frequency, Hz
50
IP protection class
IP41
Net dimensions (LxWxH), mm
320х190х400
Gross dimensions (LxWxH), mm
420х220х520
Net weight, kg
8.4
Gross weight, kg
8.8
EAN code
4260405362455

Assembled in PRC.