Motor pump for clean water KS 80

Max. productivity	1000 l/min
Nominal speed	3600 rpm
Max. lifting height	28 m
Max. suction depth	7 m
Engine power	7 hp
Engine volume	212 cm3

Water pumps for clean water are ideal for use in rural households, villas, and areas where there is a need to pump water out of basements or wells and to dry up flooded areas. Water pumps for pure water can be used for pumping liquids with particles up to 5-6 mm.

After starting the engine, allow the pump to run for about 30 seconds, then stop the engine and add more water to the pump to increase its efficiency and continue working.

Features:

K&S branded engine with increased service life is manufactured under license of DIMAX Int. GmbH (Germany).
All water pumps from Könner & Söhnen TM are equipped with a reinforced steel frame for Heavy Duty operations.
Compact size and light weight.
The high-strength aluminum housing is resistant to corrosion, temperature effects, and deformation.
High performance.

Könner & Söhnen branded engines

Könner & Söhnen water pumps feature durable and fuel-efficient branded engines, which are manufactured under the strict control of German engineers. The robust K&S engine meets all European quality standards, including the latest EURO V emission standard.

Individual serial numbers on engines

Each engine has its individual serial number, which enables to control the quality of production and service. Könner & Söhnen engines are characterized by an easy start and reduced vibration.

Equipment

The housing of Könner & Söhnen motor-pumps is made by using integral molding and high-strength aluminum, which is resistant to corrosion, temperature effects, and deformation. Water pumps are equipped with an enlarged steel fuel tank, which extends the operating time without refueling.

Reinforced frame

All water pumps from Könner & Söhnen TM now feature a reinforced steel frame, which protects the water pump from damage during operation and transportation and is indispensable for Heavy Duty tasks.

Vibration dampers

All models of the Könner & Söhnen pumps are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working pump will not damage the surface covering, and the frame coating will not be scraKönner & Söhnen water pumps are equipped with anti-skid rubber feet for reduced vibration and corrosion protection. The rubber dampers prevent the running water pump from damaging the flooring and scratching the frame surface.tched.

Accessories

Water pumps come complete with the following accessories: water filter, mounting set, spark plug wrench, hose connection kit.

Engine model

KS 200

Engine volume, cm3

212

Engine power, hp

Fuel tank volume, l

3.6

Crank case volume, l

0.6

Noise level Lpa (7m)/Lwa, dB

79/104

Max. productivity, l/min

1000

Nominal speed, rpm

3600

Max. lifting height, m

Max. suction depth, m

Diameter of inlet pipe, mm

Diameter of outlet pipe, mm

Net dimensions (LxWxH), mm

490x400x410

Gross dimensions (LxWxH), mm

510×440×440

Net weight, kg

Gross weight, kg

EAN code

4260405361359

Assembled in PRC.

Water pumps K&S

Könner & Söhnen Garden 2024

KS 80 Water Pump for Clean Water

A water pump is an effective device for pumping water. These units are mostly used for draining flooded areas and pumping water from wells or flooded basements. The KS 80 pump for water is intended for pumping liquids free of coarse impurities (with a particle size up to 6 mm), thus rendering it unsuitable for conveying wastewater and other contaminated liquids containing large solids.

The waterpump provides maximum efficiency and is easy to operate. The operation is very simple and intuitive.

The water pump is equipped with a powerful 6.5 hp engine that meets European environmental standards. Each engine has a laser marking with an individual serial number.

The water pump of this modification features an aluminum enclosure, which ensures its complete tightness and reliability. The high-strength aluminum is resistant to corrosion and deformation.

The pump engine is started with a manual starter. This procedure is simple and does not require much physical effort. The water pump has a variety of applications, including domestic use or use in factories, construction sites, and industrial facilities.

This water pump has a reinforced frame for extra protection and carrying it from place to place.

The motor pump has inlet and outlet pipes for water intake and discharge, with appropriate hoses connected to them. Owing to its sophisticated design and the diameter of these pipes (80 mm), we managed to increase the unit's capacity to 1000 liters per minute. The unit can be used to pump water to a depth of up to 7 meters. The maximum lifting height is 28 meters.

If you need to buy reliable water pump, you should consider purchasing Könner & Söhnen products

This multi-purpose water pump is intended primarily for owners of country houses and land plots requiring frequent water pumping. The high-pressure pump will also come in handy in various production facilities using large volumes of water.

We encourage you to buy motor water pump Könner & Söhnen straight from the manufacturer after carefully reading the product description on our website. Please visit our online store or dealer stores listed on the “Outlets” page or contact us directly at our phone numbers.