KS 8102HDE (EURO II)
| Voltage | 120 V |
| Starting watts | 6.5 W |
| Running watts | 6.0 W |
| Engine start | recoil/electric |
| Outlets | 1 x Schuko 230 V, 1 x 30A |
| Special functions | Preheater function, 1-cylinder, Air cooled engine |
Könner & Söhnen engines
Engines for both diesel and gasoline generators are manufactured under the license of DIMAX Int. GmbH and are marked with K&S logo. High power of engines in relation to the alternator allows to receive the declared power output and maintain stable work at any load. All engines are tested for continuous operation, and then disassembled and examined for trouble-shooting purposes. Each engine and each generator have an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards.
Increased engine resource
Heavy Duty series generators can be used not only as emergency power source, but also for long-term full-time operation. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty. To show high performance, machines should be maintained properly.
Preheater function
All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.
Ergonomic control panel
Convenient and ergonomic generator's control panel allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintain the generator, extending the operation life.
AVR
“Könner & Söhnen” series diesel generators are equipped with intelligent voltage stabilization system AVR. It allows to keep the voltage at a constant value of 230 V and protects against unwanted short circuits.
Enforced frame
Additional frame reinforcement with the upper protective strips allows HEAVY DUTY professional series generators to operate in a more rigid mode. The reinforced frame structure protects the tank against damage during operation and transportation.
Dampers to lower vibration
All models of Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. The working generator will not damage the floor covering, and the frame coating will not be scratched.
Accessories set
Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.
Voltage, V
120
Starting watts, W
6.5
Running watts, W
6.0
Frequency, Hz
50
Current (max), А
28.26
Outlets
1 x Schuko 230 V, 1 x 30A
Run time @50% (gasoline), h***
6.9
LED display
Voltage, frequency, working hours
Noise level Lpa (23 ft.)/Lwa, dB
71/96
Power output DC, V/А
12/8.3
Engine type
Diesel powered one-cylinder, four-stroke air-cooled
Engine model
KS 480HD
Engine power, hp/kW
14.0/10.3
Preheater
+
Fuel tank volume
11
Crank case volume
1.65
Engine cylinder volume, cc
456
Power output controller
Intelligent voltage stabilization system AVR
Engine start
recoil/electric
Frame diameter
32 mm, round
Accumulator, A·h
30
Output for ATS
-
Net dimensions (LxWxH)
730×495×630
Gross dimensions (LxWxH)
760×550×660
Net weight, lbs
117
Gross weight, lbs
125
Protection class
IP23M
EAN code
4260405363674
***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
Related products
.png)
