Diesel generator "Könner & Söhnen" KS 9300DE ATSR SUPER S (EURO V)
|Max power||7.0 kW|
|Nominal power||6.5 kW|
|Outlets||1 x CEE 230 V 32 A, 2 x Schuko 230 V|
|Special functions||ATS output, Preheater function, 1-cylinder, Soundproof antivandal housing, Air cooled engine|
Engines for diesel generators, as well as for gasoline, are manufactured under license DIMAX Int. GmbH and are marked with their own brand with the logo. In all models, the power reserve of the engine in relation to the alternator allows you to issue the declared voltage and maintain its stability in the full range of voltages. All engines are tested for long continuous operation, and then disassembled and examined for faults. Each engine and each generator has an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards, including the modern EURO-V environmental standard.
AUTOMATIC TRANSFER SWITCH
|Battery voltage||12 V DC|
|Current (max)||63 A|
|Working environment||from -10°C to +55°C; humidity: ⩽60%|
|Storage environment||from -10°C to +70°C; humidity: ⩽60%|
|IP protection class||IP41|
|Insulation class||AC1.5KV / 1min 1mA|
|Maximum battery charging current from the built-in power supply, A||2|
|Control cable length||4.4 m|
|Net dimensions (LxWxH)||320х190х400 mm|
|Gross dimensions (LxWxH)||420х220х520 mm|
|Net weight||8.4 kg|
|Gross weight||8.8 kg|
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.
PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off
The KS ATS 4/63HD ATS unit is compatible with all Könner & Söhnen diesel generators with the abbreviation “ATSR” in the article number.
The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.
INCREASED ENGINE LIFE
Könner & Söhnen® diesel generators of the "HEAVY DUTY" series have an increased motor resource - so they have a longer service life, can work for more hours without a break. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty. To show high performance, machines should be maintained properly.
THE USER-FRIENDLY ERGONOMIC CONTROL PANEL
Comfortable ergonomic panel allows you to easily control the entire unit and does not require additional skills. Modern multifunctional LED-display shows the frequency, voltage, the number of hours worked by the generator and the operating time from the start in minutes. The information on the display helps to easily control the quality of the voltage output by the device.
PRE-START HEATING (PREHEATER)
Diesel generators series “HEAVY DUTY” are equipped with a pre-start heating function, which allows you to run the generator in the winter without much effort.
HOUSING WITH DOUBLE SOUND INSULATION
Generators of the KS 9300 series are equipped with the anti-vandal case with double sound insulation. These models have improved internal heat distribution, which also increases the life of generators.
Assembled in PRC.
***Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
KS CR-15M Extension Cord
KS CR-25M Extension Cord
KS CRM-30M Extension Cord
Könner & Söhnen 10W-30 Universal motor oil
KS Gloves L Gloves
KS D-STAB 60 Diesel Stabilizer